Drill Tip Length Calculator For Metal

Drill Tip Length Formula:

\[ Length = \frac{Diameter / 2}{\tan(118^\circ / 2)} \]

Length:

Unit Converter ▲

Unit Converter ▼

From:	To:

1. What is Drill Tip Length Calculation?

Drill tip length calculation determines the length of the conical tip of a drill bit based on its diameter and the standard 118-degree point angle commonly used in metal drilling applications.

2. How Does the Calculator Work?

The calculator uses the drill tip length formula:

\[ Length = \frac{Diameter / 2}{\tan(118^\circ / 2)} \]

Where:

\( Diameter \) — Drill bit diameter in millimeters
\( 118^\circ \) — Standard point angle for metal drilling

Explanation: The formula calculates the length of the conical tip by using trigonometric relationships based on the drill's diameter and point angle.

3. Importance of Drill Tip Length Calculation

Details: Accurate drill tip length calculation is essential for precision drilling operations, determining proper drill depth, and ensuring accurate hole dimensions in metalworking applications.

4. Using the Calculator

Tips: Enter the drill bit diameter in millimeters. The value must be greater than zero for accurate calculation.

5. Frequently Asked Questions (FAQ)

Q1: Why is 118 degrees used as the standard point angle?
A: 118 degrees is the most common point angle for general-purpose metal drilling as it provides a good balance between cutting efficiency and point strength.

Q2: Can this calculator be used for other point angles?
A: This specific calculator is designed for the standard 118-degree point angle. Different angles would require modification of the formula.

Q3: How accurate is this calculation?
A: The calculation provides theoretical accuracy based on geometric principles. Actual drill tip length may vary slightly due to manufacturing tolerances.

Q4: Why is drill tip length important in metalworking?
A: Knowing the drill tip length helps in determining the exact drilling depth needed to achieve specific hole dimensions and ensures proper clearance during drilling operations.

Q5: Can this be used for drill bits of all materials?
A: While the formula is geometric, it's primarily designed for standard metal drill bits. Specialized drill bits may have different point geometries.